Consignes De Securite; Intended Use; Quick Reference Information - Pride Mobility Products Commander 400 Série Mode D'emploi

WARNING! A Pride Provider or a qualified technician must perform the initial setup of this product and must
perform all of the procedures in this manual.
The symbols below are used throughout this owner's manual and on the product to identify warnings
and important information. It is very important for you to read them and understand them completely.
WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated procedures can
cause either personal injury, component damage, or malfunction. On the product, this icon is represented as a
black symbol on a yellow triangle with a black border.
MANDATORY! These actions should be performed as specified. Failure to perform mandatory actions can
cause personal injury and/or equipment damage. On the product, this icon is represented as a white symbol
on a blue dot with a white border.
PROHIBITED! These actions are prohibited. These actions should not be performed at any time or in any
circumstances. Performing a prohibited action can cause personal injury and/or equipment damage. On the
product, this icon is represented as a black symbol with a red circle and red slash.

Intended Use

The intended use of the Pride Mobility Products device is to aid in the transport of products that provide
mobility to persons limited to a seated position that have the capability of operating a mobility device.

Quick Reference Information

Pride Provider:
Address:
Phone Number:
Purchase Date:
NOTE: This owner's manual is compiled from the latest specifications and product information
available at the time of publication. We reserve the right to make changes as they become nec-
essary. Any changes to our products may cause slight variations between the illustrations and
explanations in this manual and the product you have purchased. The latest/current version of
this manual is available on our website.
NOTE: This product is compliant with WEEE, RoHS, and REACH directives and requirements.
NOTE: This product meets IPX4 classification (IEC 60529).
NOTE: The Outlander Series Lift System and its components are not made with natural rubber
latex. Consult with the manufacturer regarding any after-market accessories.
Copyright © 2017
INFMANU4414/Rev C/September 2017
C O N S I G N E S D E S E C U R I T E