Adjusting Airflow Direction - Mitsubishi PAR-SL100A-E Manuel D'utilisation

4. Operation
2
5
10
4.4. Adjusting airfl ow direction
<Changing the vertical airfl ow direction (vane)>
Press the
A
• Each time the button is pressed, the setting changes.
For models with swing and automatic functions
Swing
3
1
4
For models without swing and
automatic functions
6
7
* For models that are not equipped with a vertical airfl ow
setting function,
airfl ow direction is set.
<Changing the horizontal airfl ow direction (louver)>
Press the
• Each time the button is pressed, the setting switches
between the swing operation and the fi xed operation.
For models with the louver
setting function
* For models that are not equipped with a horizontal airfl ow
setting function,
airfl ow direction is set.
Note:
In the following cases, the vertical airfl ow direction of the
unit may be different from the direction shown on the re-
mote controller display.
• The unit is performing the warming-up operation or the
defrosting operation.
• Immediately after starting the heating operation (while the
system is waiting for the mode change to take effect).
• In the heating mode, the room temperature is higher than
the temperature setting.
button 5.
Auto Step 1 Step 2 Step 3 Step 4 Step 5
Step 1 Step 2 Step 3 Step 4
A blinks twice when the vertical
button 6.
Fixed Swing
A blinks twice when the horizontal