Marquant 880137 Mode D'emploi page 36

3. Start the measurement. The marking ( ) is
shown on the display. The measurement
result is shown when the measurement is
complete.
Displaying memory items
1. Press the MEM button. The last saved
memory item is displayed. Browse up with
MEM button, or down with the SET button.
2. When the unit is switched off you can press
the MEM button
measurement result.
Emptying the memory
To empty the memory, press the MEM button for 5
seconds. No is shown in the display to indicate that
all memory items have been deleted.
Follow the instructions below to keep the unit in good condition.
•
Store the unit in the case when not in use.
•
• Do not fold the wrist sleeve too hard.
• The Velcro strip can damage the inside surface of the sleeve.
Clean the unit and sleeve with a soft, dry cloth.
•
Do not use abrasive or solvent-based detergents.
•
IMPORTANT:
• Do not immerse the unit or its components in water or
any other liquid. Do not expose the unit to moisture,
extreme temperatures or direct sunlight.
• Store the unit and its components in a safe place.
• Do not expose the unit to knocks and blows.
• Remove the batteries if the unit is not going to be used
for 3 months, or more. Replace all the batteries at the
same time.
ENGLISH
to show the last
MAINTENANCE
36