Inserting The Batteries - Marquant 880137 Mode D'emploi

Inserting the batteries

Recycle used batteries in accordance with local regulations.
IMPORTANT:
• Insert the batteries with the polarity shown in the battery compartment.
• Replace all the batteries when the battery indicator
new batteries. This could cause malfunctioning or damage the batteries. The battery indicator will
also stop working.
The battery time gets shorter at low ambient temperatures.
•
Remove the batteries if the unit is not going to be used for some time.
•
• Otherwise there is a risk that battery leakage will damage the unit.
• Only use batteries recommended by the manufacturer. The supplied batteries are intended for trial
usage, and may have a shorter battery life.
Setting the date/time and voice function
13. Press the SET button.
14. Keep the SET button pressed until the year digits flash in the display.
15. Press the MEM button to set the year. Press SET to save the setting and activate
the month setting.
16. Press the MEM button to set the month. Repeat these steps to set the day/hours/minutes and voice
function On/Off.
voice function).
Choice of units, mmHg/kPa
The unit can show blood pressure in mmHg or kPa. The default
setting is mmHg.
Press the power switch for 5 seconds to activate setting the unit
of measurement.
The selected unit is also applied in the memory items.
" " indicates that the function is active,"
year month
ENGLISH
10.
11.
12.
flashes in the display. Do not mix old and
" that it is inactive (only for units with
day hour
34
Remove the battery cover.
Insert new batteries in the
battery compartment with the
correct polarity.
Replace the battery cover.
Only use AA batteries.
minutes voice function