Front USB 3.0 Connector: JUSB4
USB 3.0 port is backward-compatible with USB 2.0 devices. Supports data transfer rate
up to 5 Gbit/s (SuperSpeed).
USB 3.0 Bracket (optional)
Important
•
Note that the pins of VCC and GND must be connected correctly to avoid possible
damage.
•
If you want to use a USB 3.0 device, you must use the USB 3.0 cable to connect to
the USB 3.0 port.
* The MB layout in this figure is for reference only.
En-19