Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MS-7750 Mainboard
MS-7750 Mainboard
Connectors
Serial ATA Connector: SATA1~6
This connector is a high-speed Serial ATA interface port. Each connector can connect
to one Serial ATA device.
SATA5
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may
occur during transmission.
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is opened,
the chassis intrusion mechanism will be activated. The system will record this status
and show a warning message on the screen. To clear the warning, you must enter the
BIOS utility and clear the record.
En-14
* The MB layout in this figure is for reference only.
SATA1
SATA3
SATA2
SATA4
SATA6
SATA1~2 (6Gb/s)
SATA3~6 (3Gb/s)
Publicité
Table des Matières
