Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATION INSTRUCTIONS
1. Before inserting the plug into an electrical outlet, make sure that the electrical supply in your
area matches that on the rating label on the unit.
2. Carefully remove the heater from the plastic bag and the carton.
3. Place the heater on the wall ,setting the master button to "-"position.plug the cord set into a
AC220-240V~ electrical outlet,with "BEE" sounds the "Power"light is on with RED color and
the heater will shows the default temperature ,it will twinkle 3 seconds.
HEATING PERPARE
-
Press the On/Off button on the appliance
-
The device is now in stand-by mode. Press the On/Off button on the remote control (4).
-
Press the MODE button to select working mode :
1000W – The device will continuously heat at 1000 power.
2000W – The device will continuously het at 2000 power.
Auto – Press +and – to manually set the temperature.
The device will automatically switch on and Off to maintain the set temperature.
Open window detection function – When this function is selected, the device will
automatically turn off the heating if room temperature suddenly drops for 10°C.
REMOTE CONTROL (battery included 1x CR2025)
1. On/Off button-Turn the device On or Off
2. MODE – Button for mode selection
3. DAY – Button for day selection
4. CLOCK – Button for hour setting
5. SET UP – Confirmation button
6. WEEK/TIMER – Button for timer setting
7. MIN – Button for minute setting
8. + / - Button for raising the temperature. Also serves as
selection button for time/day
9. - - Button for lowering the temperature. Also serves as
selection button for time/day
10. RESET – Timer reset button
TIMER
1. On symbol
2. Heating power 1000W
3. Heating power 2000W
4. AUTO function
5. Temperature display
6. Day display
7. Time display
8. ON symbol – timer start up
9. OFF Symbol – Timer shutdown
10. Open window detection function
The timer can only be set when AUTO function is
selected.
14
Publicité
Table des Matières
