Sunny SF-T7705 Manuel De L'utilisateur page 23

WINDOW DISPLAY:
SPEED/ PULSE: The speed range is 0.5-9.0 MPH. 0.5 MPH is the default running speed.
When the runner holds both hands on the pulse sensors (located on the handles), the system will
calculate the runner's heart beat and display it in this window. The pulse range is 50-200 beats/min
NOTE: This data is just for reference and cannot be used for medical purposes.
TIME: Displays the time elapsed. Display starts at 0:00 minutes: seconds. After it reaches 59:59 minutes:
seconds, the display will change to 01:00 hours: minutes. Maximum display for time elapsed is 18:00
hours: minutes. When time elapsed reaches the maximum, the treadmill will continue running. It will start
count again from 0:00.
When in Countdown Mode, it will count from the setting time to 0:00. When the clock reaches 0:00, the
treadmill will stop smoothly and display "End" then automatically reset itself after 5 seconds. Maximum
Countdown time is 99:00 minutes: seconds.
DISTANCE: Displays the distance traveled (0.0-99.9 MILES). When the clock reaches 99.9, it will reset to
0.00 and begin counting again from 0.0. When in Countdown Mode, it will count down from the setting
data to 0.00. When it reaches 0.00, the treadmill will stop smoothly and display "End" and automatically
reset to the initial setting after 5 seconds. When setting PROGRAMS, the speed is programmed in
intervals; PROGRAMS are from P1-P9-FAT.
CALORIES/INCLINE: Displays the number of calories burned from 0 to 999 KCAL and the incline level
from 0-15. When the count reaches 999, it will reset and start back from 0. When in Countdown Mode, it
will count down from the desired setting to 0. Once it reaches 0, the treadmill will stop smoothly and
display "End", then automatically reset to the initial setting after 5 seconds.
STEPS: Counts steps that the user has walked. When it displays steps, it will count from 0 to 99999.
When it reaches 99999, it will count again from 0.
MATRIX: The matrix window will display a 0.25 miles running track. Once you finish running the lap, the
treadmill will beep and show the number of laps you've completed.
PROGRAMS
TIME (MIN:SECOND)
INCLINE (SECTION)
SPEED (MPH)
DISTANCE (MILE)
PULSE (BPM)
CALORIE (KCAL)
Initial Default Value
0:00 10:00
0 0
0.5 0.5
0.00 1.00
P N/A
0 50
22
Set Range Display Range
0:00－99:00
5:00-99:00
0-15
0.5-9
0.00－99.9
0.50-99.9
N/A 50-200
0－999
10-999
0-15
0.5-9