Power Supply; Display Functions - Alecto FR-12 Mode D'emploi

The FR-12 works on 3x AAA penlite batteries.
1. First, remove the belt clip by pres-
sing the lock tab back and pushing
the belt clip upwards and out of
the radiophone.
2. Now open the battery compart-
ment by sliding the cover down-
wards.
3. Install the batteries as indicated.
Pay attention to the correct polari-
ties (+ and -).
4. Close the battery compartment
and put the belt clip back on the
radiophone.
You can return exhausted batteries to the dealer
of these radiophones or to your local collection
point for small chemical waste. Never dispose of
empty or exhausted batteries as normal domes-
tic waste.
CH: shows the selected channel
: turns on while sending
: turns on when the radiophone
is receiving a signal
5
LE: shows the volume level
: battery capacity indication

POWER SUPPLY

DISPLAY FUNCTIONS

27
GB