Important - CLAS B.LINE AC 5240BL Notice

AC 5240BL
COMMON RAIL INJECTOR TESTER
Important: read these instructions carefully. Note the safe operational requirements, warnings and cautions. Use the
tool correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and/or
personal injury and will invalidate the warranty. Please keep instructions safe for future use.
WARNINGS
WARNING! Ensure all Health and Safety, local authority, and general workshop practice regulations are strictly
adhered to when using this kit.
Maintain tools in a good clean condition for the best and safest performance,
DO NOT use test kit if parts are damaged.
Wear approved eye protection. A full range of personal safety equipment is available from your dealer.
Wear suitable clothing to avoid snagging. Do not wear jeweler and tie back long hair.
WARNING! In a vehicle fi tted with automatic transmission, select neutral or park.
Use proper ventilation and avoid breathing in exhaust fumes.
Keep a fi re extinguisher to hand.
Protect hands from burns, as the engine will be hot after the test.
Account for all tools and parts being used, and do not leave them in, or on the engine after use.
Ensure that any collected diesel is disposed of correctly, in accordance with local authority guidelines.
DO NOT leave vehicle's engine running unattended whilst the testing kit is fi tted.
IMPORTANT: Always refer to the vehicle manufacturer s service instructions, or a proprietary manual to establish
the current procedure and data. These instructions for use are provided as a guide only.
INTRODUCTION
Designed to measure return fuel fl ow on diesel vehicles with up to 6 cylinders and fi tted with common rail injection
system. Identifi es worn, blocked or inoperative injectors, quickly and easily. The Master kit contains measurement
tubes for short term tests and measurement bottles for long term, more accurate evaluation.
Includes range of adaptors to suit Bosch, Delphi and Denso injectors, for comprehensive cove rage of common rail
diesel vehicles. The kit comprises measurement tubes and measurement bottles (for Bosch injectors). The comprises
adaptors for Bosch, Delphi and Denso injectors.