Using The Stand Mixer - Brabantia D3 Notice D'utilisation

USING THE STAND MIXER

Depending on the nature of the ingredients, the bowl (5) with its cover can be used to
prepare up to 1kg of dough (500g flour).
1. Press button (2) to release the multifunctional head (9) and to raise it to a vertical
position. (Fig. 1 & 2)
2. Fit the bowl (5) onto the appliance by turning until it locks in position and place the
ingredients in it. (Fig. 3)
3. Position the cover (4) on the bowl with the filling opening at the front of the
appliance. Fit the desired accessory (6/7/8) into the power outlet. Push the shaft of
the accessory home and turn it a quarter turn towards you, to lock it into position.
(Fig.4)
5. Lower the multifunctional head of the appliance to a horizontal position and press
the button again until it clicks into place. (Fig. 5 & 6)
6. Set the timer (3) to control the working time of your recipe. Set from a min time of
"0" to a max time of "30" minutes (plus 30 seconds to adjust) in one set. (Fig.7)
7. During preparation, you can add ingredients through the opening in the cover.
8. To stop the appliance, turn off the switch (1).