Care And Maintenance - Nissei WS-1300 Instructions

still and quiet during measurement.
Measurement was taken right after exercise or other
activities influencing the reading. Measure again after
resting for more than 5 minutes. See TIPS ON
TAKING YOUR BLOOD PRESSURE.
CARE AND MAINTENANCES
Because the unit includes precision parts, care should be taken to
avoid extreme temperature variations, humidity, shock, dust, and
direct sunlight. Do not drop or strike the unit. Make sure not to
expose the unit to moisture. This unit is not water resistant.
Clean the body with a cloth moistened with water and a mild
detergent, and then wipe dry. Do not use gasoline, paint thinner, or
other strong solvents. Since the cuff may absorb perspiration and
other fluids, inspect it for stain and discoloration after each use.
When cleaning the cuff, use a synthetic detergent and gently rub
the surface.
When storing the unit, do not place heavy objects on it. When the
unit has been stored at a temperature below the freezing point,
keep it for at least 1 hour in a warm place before using it.
ERROR DISPLAYS AND TROUBLESHOOTING
If you cannot get correct measurement with the methods above,
stop using the unit and contact your dealer. Do not tamper with the
internal mechanism. If the unit malfunctions, please return it to the
dealer or an authorized service representative for service
according to the warranty.
Remove the batteries if the instrument is to be stored for an
extended period of time. Keep the batteries out of reach of
children.
We suggest that you have your monitor checked every 2 years.
This operation may only be performed by the manufacturer or by
firms authorized by the manufacturer.
Do not inflate the cuff (start a measurement) when it has not been
wrapped around your wrist. Do not try to stretch or twist the cuff,
and do not bring it into contact with sharp or pointed objects.
Do not disassemble or modify the unit.
-18-