Blaupunkt BLP3920-001 Mode D'emploi page 11

Specifications
Rated voltage : DC 5V 2A
Max consumption : 10W
Li-ion battery 2400mAh
Radio frequency : 2,4GHz
Sound power : 10Wx2
Frequency range : 70Hz-20KHz
Bluetooth compatible version : 4.2
Distance Bluetooth stays connected : 10m
Music playing time : 8 hours
Charging time : 2-3 hours
Audio format supported : AVI, MP3, MP4, WMA, WAV
Dimensions : 21 x 7,5 x 7,5cm
Weight : 680g
Charging the product
1. Please use USB charging cable with MICRO port to charge the speaker.
2. Connect the micro charging cable to the speaker and the USB adaptor(not included), the LED
indicator light white flashing indicating that it's charging, the indicator will fully light up while
charging finished.
3. When battery power is low, you will hear warning tone.
Pairing
1. Bluetooth mode pairing.
Long press the power button to turn "ON" to enter Bluetooth mode. Then open your cellphone
Bluetooth function and find the speaker's Bluetooth pairing name "BLP3920" for connection. If
your cellphone need a password to connect the Bluetooth, please put "0000" to finish
connection.
Short press the Bluetooth button 1 second to reconnect the speaker to your phone in a standby
mode.
2. TWS function pairing.
Long press Bluetooth button to enter/disconnect to the TWS mode (you will need 2 units of the
same speaker to play as TWS mode).
Functions
1. Short press +/NEXT to increase volume, long press to switch to next song.
2. Short press -/PREV to decrease volume, long press to switch to previous song.
3. Long press+/- at the same time to turn on/off slapping sound.
4. Short press Play/Pause to pause/play/answer a call.