Operating Remote Control - Napoleon Alluravision Série Manuel D'installation Et D'utilisation

6.2

operating remote control

NEFL42/50/60/74/100CHD-1 remote
Power
Blue Flame
Orange Flame
Yellow Flame
Heater
Flame Speed
Top Light
NEFL42/50/60/
74/100CHD-1 only
Turns the appliance on/off.
Controls flame brightness.
Settings:
F0 - Flame off
F1 - Dimmest flame
F2 - Dim flame
F3 - Bright flame
F4 - Brightest flame
Turns the heater and blower
on/off.
Settings:
H0 - Heater and blower off
BL - Blower on
H1 - Low heat
H2 - High heat with blower
boost
Controls the speed of the
flame. There are 5 flame speed
settings: 01 (slowest) 02, 03,
04, and 05 (fastest).
Same as ember bed color.
NEFL42/50/60/74CHS-1 remote
Ember Bed Color
Ember Bed
Brightness
Timer
Temperature
Control
operation
Controls ember bed light
settings.
Settings:
L0 - Ember bed light off
L1 - Red
L2 - Blue
L3 - Green
L4 - White
L5 - Yellow
L6 - Purple
L7 - Auto-cycle through red,
blue, green, white, yellow, and
purple. (NOTE: It will take 3
seconds to switch between
colours.)
L8 - Lock to desired color
Controls the brightness of the
ember bed light.
Settings:
B1 - Dimmest
B2 - Dim
B3 - Bright
B4 - Brightest
There are 10 timer settings:
00, 0.5h, 1h, 2h, 3h, 4h, 5h,
6h, 7h, 8h.
There are 11 temperature
settings: 18ºC [64ºF], 19ºC
[66°F], 20°C [68ºF], 21ºC
[70ºF], 22ºC [72ºF], 23ºC
[74ºF], 24ºC [76ºF], 25ºC
[78ºF], 26ºC [80ºF], 27ºC
[82ºF] and OFF.
W415-2841 / F / 05.10.22
EN
25