SENSEA TERZO MIR70/90LED Mode D'emploi page 28

MISCELLANEOUS AFTERSALES SERVICE, REPAIRS, GUARANTEE, ETC.
Have this appliance repaired by a qualified professional.
This electrical product complies with the safety standards in force. Repairs must only
be carried out by qualified technicians using original spare parts. Any failure to follow
these instructions can be particularly dangerous to users.
If necessary, contact the after-sales service of the store where you purchased this
product.
Information for the external connection box:
• Connect the electricity supply to the terminal block, respecting the following
connection colour code:
- Connect the Brown Wire (Live) to the corresponding terminal marked L on the
terminal block.
- Connect the blue wire (Neutral) to the corresponding terminal marked N on the
terminal block.
• Attach the mirror to the wall.
• Turn the electricity supply back on and switch on the luminaire. Your luminaire is
now ready to be used.
Use a double-insulated 3G 1,5 mm² silicone rubber power cable . The operating
temperature of the cable must be above 130°C. The external diameter of the cable
must be over 9 mm to ensure optimum insulation.
54 55