Warning Symbols; General Safety Instructions; Electrical Safety Instructions - SENSEA TERZO MIR70/90LED Mode D'emploi

WARNING SYMBOLS

Read the instructions
carefully.
Class II. Double insulation.
This luminaire cannot be
earthed.
LED 220-240 V
CRI 80 - 3000°K - 4500°k - 6500°K
Protection rating:
Protected against solid objects
IP44
greater than 1 mm.
Protected against splashing
water from all directions.
Compliance with European
Regulatory Requirements.
50

GENERAL SAFETY INSTRUCTIONS

Read this user manual carefully before using the appliance, and keep it for future
reference and pass it on to a third party if necessary.
WARNING:
When using electrical appliances, comply with basic safety
!
precautions in order to reduce the risk of fire, electric shocks and personal injury.
1. General Instructions
No-one, and in particular no child, must be in the vicinity of the workplace.
Check that the electrical specifications of this luminaire are compatible with your
installation.
WARNING:
!
- The power supply must be switched off before installation, maintenance or
cleaning. Remove the fuse or de-activate it, and make sure that it cannot be
re-activated.
- Before drilling a hole, make sure that there is no risk of drilling through an
existing non-visible cable or pipe.

2. Electrical safety instructions

The luminaire must be installed by a qualified electrician in accordance with the
wiring standards in force in the country where the installation takes place.
51