Luminance Brands Kathy Ireland Home VERANDA Manuel Du Propriétaire page 6

3.4
The Flanges have an Interlocking feature that must be
fully engaged before tightening the M6 x 14mm Captive
Pan Head Screws (Figure 4) .
If one of the Flanges does not seat properly on the
Motor Hub, loosen the adjacent M6 x 14mm Captive
Pan Head Screw, re-engage and reseat the Flanges,
then tighten the M6 x 14mm Captive Pan Head Screw
again .
A spare M6 x 14mm Pan Head Screw is provided in the
parts bag, if needed .
3.5
Remove and Retain One of the Three M4 x 10mm
Serrated Pan Head Screws from the Adapter Plate
(Figure 5) .
Loosen the Two M4 x 10mm Serrated Pan Head
Screws, three or four turns .
3. Ceiling Fan Assembly
FLANGE
INTERLOCKING
FEATURE
Figure 4
REMOVE & RETAIN ONE
M4 x 10mm SERRATED PAN
HEAD SCREW
Figure 5
6
BLADE/FLANGE
ASSEMBLY
FLANGE
INTERLOCKING
FEATURE
LOOSEN TWO
M4 x 10mm
SERRATED
PAN HEAD
SCREWS
U.L. Model No.: CF542 & CF552