Before Operating; To Set The Clock; Stop/Clear; Open Or Close Drawermicro Oven - Viking Range DrawerMicro Mode D'emploi

Masquer les pouces Voir aussi pour DrawerMicro:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before Operating

Before operating your new DrawerMicro Oven make sure you read and understand this Use and Care Guide completely.
The following steps MUST be taken before any functions can be used. Before you use the DrawerMicro Oven:
1. Plug in the DrawerMicro Oven.
appear.
2. Touch the Stop/Clear pad.
3. Set clock.

To Set The Clock

1. Touch Timer/Clock pad and number 2.
2. Enter the correct time of day by touching the numbers in sequence. Touch Timer/Clock pad.
This is a 12 hour clock. If you attempt to enter an incorrect clock time,
Clear pad and re-enter the time.
• If the electrical power supply to your DrawerMicro Oven should be interrupted, the display will intermittently show
ENJOY
YOUR
MICRO-
occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch Stop/Clear pad
and reset the clock for the correct time of day.

Stop/Clear

Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during timed cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.

Open Or Close DrawerMicro Oven

Always Touch the OPEN or CLOSE pad on the control panel to open or close the DrawerMicro Oven.
Do not push or pull the drawer by hand, except in case of emergency, such as a power failure. If necessary, push or
pull slowly.
ENJOY
YOUR
MICRO-
:
will appear.
WAVE
TOUCH
CLEAR
AND
11
WAVE
TOUCH
CLEAR
AND
ERROR
will appear in the display. Touch the Stop/
TOUCH
CLOCK
after the power is reinstated. If this
TOUCH
CLOCK
will
E

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vmod5240Cvmod5240

Table des Matières