Before Operating; To Set The Clock; Stop/Clear; Open Or Close Drawer Microwave - Bertazzoni MD24X Mode D'emploi

Before operating your new Drawer Microwave make sure you
read and understand this Use and Care Guide completely.
The following steps MUST be taken before any functions can
be used. Before you use the Drawer Microwave:
1. Plug in the Drawer Microwave.
WAVE TOUCH CLEAR
appear.
2. Touch the Stop/Clear pad.
3. Set clock.

TO SET THE CLOCK

1. Touch Timer/Clock pad and number
2. Enter the correct time of day by touching the numbers in
sequence. Touch Timer/Clock pad.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time, will appear in the display. Touch the Stop/
ERROR
Clear pad and re-enter the time.
• If the electrical power supply to your Drawer Microwave
should be interrupted, the display will intermittently show
ENJOY YOUR MICRO-
AND TOUCH CLOCK
If this occurs during cooking, the program will be erased.
The time of day will also be erased. Simply touch Stop/
Clear pad and reset the clock for the correct time of day.

BEFORE OPERATING

ENJOY YOUR MICRO-
AND TOUCH CLOCK
will appear.
:
.
2
WAVE TOUCH CLEAR
after the power is reinstated.
Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
will
3. Stop the oven temporarily during timed cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.

OPEN OR CLOSE DRAWER MICROWAVE

Always Touch the OPEN or CLOSE pad on the control panel
to open or close the Drawer Microwave.
Do not push or pull the drawer by hand, except in case of
emergency, such as a power failure. If necessary, push
or pull slowly.
9

STOP/CLEAR

E