Epson XP-800 Série Guide D'utilisation page 22

Masquer les pouces Voir aussi pour XP-800 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
Basic Guide
Note:
❏ If the ink cartridge holder does not move to the ink
cartridge replacement position, follow the
instruction below.
Home > Setup > Maintenance > Ink Cartridge
Replacement
❏ Do not move the ink cartridge holder by hand;
otherwise, you may damage the product.
D
Push the tab to unlock the ink cartridge holder
and then remove the cartridge diagonally.
Note:
The illustration shows replacement of the cartridge on
the far left. Replace the cartridge appropriate to your
situation.
E
Put the ink cartridge head first into the ink
cartridge holder. Then push the bottom of the
cartridge down until it clicks into place.
Replacing Ink Cartridges
F
Put the cap back on to the removed cartridge's
ink supply port. Dispose of the used cartridge
properly.
G
Close the scanner unit. The ink cartridge holder
returns to its home position.
H
Follow the on-screen instruction.
Note:
❏ The P light continues to flash while the product is
charging ink. Do not turn off the product during ink
charging. If the ink charging is incomplete, you may
not be able to print.
❏ Do not insert CD/DVD tray until ink charging
complete.
20

Publicité

Table des Matières
loading

Table des Matières