Work Sharp WSKTS-KO-I Mode D'emploi page 12

Belt Name Extra Coarse
Grit
P120
Size
Norton SG
What it Sharpens
Tool Sharpening
Uses
Knife Repair
Engineered abrasives are long lasting and should meet your sharpening needs.
•
Keep belts dry.
•
• Keep clean for best performance and life.
6000 Belt is narrow for improved gut hook sharpening.
•
Belt Grits are labeled on backing (μ = micron).
•
• For reference, belts are equivalent to: X65 (P220) | X22 (P1000) | X4 (P3000)
Abrasive Belt Wear
Belt discoloration is not an indicator of wear. Engineered belts expose new
abrasive as they break down. Used belts may take extra strokes but will
continue to remove material. These belts will keep going longer than you think.
Keep using them as long as they cut.
12
Knife Sharpening Guide Adjustment
15° - 30° in 1° increments. Included (total) edge
angle is 2 x the angle selected. Align desired
angle with the indicator line on top of guide.
Speed Control Adjustment
Low speed (+/-) is 1200 SFM
Mid speed (+/-) is 2000 SFM
High speed (+/-) is 2800 SFM
SFM = Surface Feet per Minute
Belt Information
Coarse Medium
X65 X22
Norax 65μ Norax 22μ
Knife Knife
Shape Sharpen
Fine
Extra Fine
X4
6000
Norax 4μ
SiC 2μ
Knife & Scissor
Gut Hooks
Hone
Serrations