Ventilation; Additional Warnings; Assembly; Torch Connection - Forney 190 MIG Manuel D'utilisation

Ventilation

Since the inhalation of welding fumes can be harmful, ensure that the welding area is
effectively ventilated.

Additional Warnings

FOR YOUR SAFETY, BEFORE CONNECTING THE POWER SOURCE TO THE LINE
CLOSELY FOLLOW THESE INSTRUCTIONS:
• An adequate two-pole switch must be inserted before the main outlet. This switch must be
equipped with time-delay fuses.
• The ground connection must be made with a two-pole plug compatible with the above
mentioned socket.
• When working in a confined space, the welder must be kept outside the welding area and
the ground cable should be fixed to the workpiece. Never work in a damp or wet confined
space.
• Do not use damaged input or welding cables.
• The welding torch should never be pointed at the operator or other people.
• The welder must never be operated without its panels attached. This could cause serious
injury to the operator and could damage the equipment.

Assembly

• Unpack the welder.
• Assemble the plastic top handle using the screws provided.
• Attach the welding torch cable to the threaded connection on the front of the welder.
• Attach the gas hose and the electrical connector.

Torch Connection

Connect the standard MIG torch to the threaded connector on the front of the welder and tighten firmly
by hand.
12
WWW.FORNEYIND.COM