Olivetti d-Copia 120D Mode D'emploi page 72

Scanning speed
Memory
Power supply
Power consumption
Overall
dimensions
Weight (Approximately) *
Unit dimensions
Operating conditions
Emulation
Interface
Noise level
Emission concentration
(measurement according to
RAL-UZ 62)
1
* Feed paper lengthwise only.
2
* Leading and trailing edges.
3
* Along the other edges in totals.
4
* The trailing edge of the second (Two-sided copy mode).
5
* Data transmission time is not included. (Only for printer)
6
* Not including TD cartridge, drum cartridge and cables.
70
Model
Local voltage
Width (mm)
Depth (mm)
6
Width (mm)
Depth (mm)
Height (mm)
Noise emission measurement in accordance with ISO 7779.
As a part of our policy of continuous improvement, OLIVETTI reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some
deviation from these values in individual units.
12 cpm model
Max. 2.88 ms/line
±
10% (For this copier power supply, see the
name plate located on the back of the unit)
607.6
462.5
15.3 kg
518
462.5
295.6
Temperature: 10°C to 30°C
Humidity: 20% to 85%
IEEE1284-compliant bi-directional parallel interface/USB
interface (USB1.1 Standard)
Sound Power Level L
Copying: 6.0 [B], Standby: 3.7 [B]
Sound Pressure Level L
Copying: 46 [dB (A)], Standby: 23 [dB (A)]
Ozone: less than 0.02 mg/m
Dust: less than 0.075 mg/m
Styrene: less than 0.07 mg/m
15 cpm model
16 MB
1000 W
607.6
492.5
16.9 kg
518
492.5
380.4
GDI
(1B=10dB)
wA
(bystander positions)
pA
3
3
3