Before Installation - Olivetti d-Copia 120D Mode D'emploi

BEFORE INSTALLATION

The following table shows the drivers and software that can be installed for each
version of Windows and interface connection method.
Users of Windows
98/Me/2000/XP who
will use the USB
interface connection
Users of Windows
98/Me/2000/XP who
will use the parallel
interface connection
Windows 95/NT 4.0
users
1
* When the unit is connected through the parallel port, the Print Status Window can only
be used when the parallel port is set to ECP mode. To set the parallel port mode, refer
to your computer manual or ask the manufacturer of your computer.
2
* Desktop Document Manager can be installed when using a parallel interface
connection, however, the unit's scanner function cannot be used.
Is there another GDI printer driver or a Windows Printing System printer
driver already installed? If installed, change the printer port setting. For
the change of the printer port setting, see "USING OTHER INSTALLED
DRIVERS" (p.44).
Flow of installation
Refer to the following table and then begin installation
Operating
system
Windows XP
Windows 98
Windows Me
Windows 2000
Windows 95/
NT 4.0
20
MFP Driver
Printer driver/
Print Status
Window
1
Available*
Interface
USB/ Installing onto Windows XP (USB/parallel interface)
Parallel (p.21)
USB Installing onto Windows 98/Me/2000 (USB interface) (p.25)
Installing onto Windows 95/98/Me/NT4.0/2000
Parallel
(Parallel interface) (p.28)
USB Installing onto Windows 98/Me/2000 (USB interface) (p.25)
Installing onto Windows 95/98/Me/NT4.0/2000
Parallel
(Parallel interface) (p.28)
USB Installing onto Windows 98/Me/2000 (USB interface) (p.25)
Installing onto Windows 95/98/Me/NT4.0/2000
Parallel
(Parallel interface) (p.28)
Installing onto Windows 95/98/Me/NT4.0/2000
Parallel
(Parallel interface) (p.28)
Scanner driver
Available
Not Available
Reference pages for how to install
Desktop
Button
Document
Manager
Manager
Available Available
Not
Available*
Available
2