Olivetti d-Copia 120D Mode D'emploi page 41

Using the SCANNER key to begin scanning
• Scanning is not possible during a copy job.
• If the SCANNER (
be stored.
• When scanning an original that has been placed in the SPF, only one
original can be placed unless you are using Desktop Document Manager.
1
Press the SCANNER (
The unit enters scan mode.
2
Place the original you wish to scan on the original table/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.47).
3
Press the right copy quantity key to
display the number of the application that
you wish to use for scanning.
The application numbers are initially as follows.
Application
number
SC1
SC2
SC3
SC4
SC5
SC6
To check the settings, see "Scan Parameter Setting Dialog Box" (p.36) and
then open the settings window of the Button Manager.
) key is pressed during a print job, the scan job will
) key.
Application launched
Desktop Document Manager (Full colour)
(if installed)
Desktop Document Manager (Monochrome)
(if installed)
E-mail (your standard e-mail program in the
Windows OS you are using)
Fax (if a fax program is installed)
OCR (if an OCR program is installed)
Microsoft Word (if installed)
4
39