Fixing The Bronze Fx To A Wall; Connecting Speaker Cables; Bare Wire Connection; Banana Plugs - Monitor Audio BRONZE Série Manuel D'utilisation

Fixing the Bronze FX to a wall

CAUTION: You will need to determine where the Bronze FX's will be fixed and the structure of the
wall. For safety reasons, if you are unsure of your ability to provide a secure and safe fixing, do not
attempt to fix these speakers to your wall, please obtain the services of a competent and qualified
trades person.
CAUTION: Ensure that there are no water pipes or electricity cables running behind where the wall
brackets are going to be secured. Work from secure steps and avoid trailing wires.
We do not supply wall fixing screws and plugs with the Bronze FX. Please use suitable fixings for
the type of wall construction the Bronze FX's will be fixed to.
To assist in fixing the Bronze FX's to the wall, we would recommend using the wall fixing template enclosed
within the packaging carton.

Connecting Speaker Cables

Bare Wire Connection

Unscrew the binding posts and pass the bare wire through the through-hole. Tighten the binding post to
clamp the wire in place.

Banana Plugs

Remove the red and black plastic plugs from the terminals and insert the banana plugs into the standard
4mm holes that are revealed. Pliers may be required to gain purchase on the plugs.
monitoraudio.com 7