You Cannot Access Your Range Extender - Cisco Linksys RE1000 Mode D'emploi

Linksys Wireless-N Range Extender

You cannot access your range extender

To access your range extender, you must be connected to your own network. If
you currently have wireless Internet access, the problem may be that you have
accidentally connected to a different wireless network.
For Mac instructions, see "To fix the problem on Mac computers:" on page 12.
To fix the problem on Windows computers:
1. On your Windows desktop, right-click the wireless icon in the system tray.
2. Click View Available Wireless Networks. A list of available networks
appears.
3. Click your own network name, then click Connect. In the example
below, the computer was connected to another wireless network named
JimsRouter. The name of the correct network, BronzeEagle in this example,
is shown selected.
4. If you are prompted to enter a network key, type your password (Security
Key) into the Network key and Confirm network key fields, then click
Connect.
Your computer connects to the network, and you should now be able to
access the range extender's browser-based utility.
Contents
11