Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation and Maintenance Instructions
Safety Messages to Maintenance Personnel
Listed below are some important safety instructions and
precautions you should follow:
•
Read and understand all instructions before operating this
system.
•
Any maintenance to the light system must be done with the
power turned off.
•
Any maintenance to the light system must be performed by a
trained electrician in accordance with NEC/CEC Guidelines
and local codes.
•
Never alter the unit in any manner. Safety may be endangered
if additional openings or other alterations are made to units.
•
The nameplate, which contains cautionary or other information
of importance to maintenance personnel, should not be
obscured.
•
If the dome is damaged in any way, the complete dome
assembly MUST be replaced.
•
After performing any maintenance, test the light system to
ensure that it is operating properly.
Failure to follow all safety precautions and instructions may result
in property damage, serious injury, or death.
Maintaining the Model 371LED-120
Establishing a regular maintenance schedule for the Model
371LED-120 extends the life of the light and ensures safety.
Periodically check that the light operates properly. Also, inspect
the dome for cracks, crazing (hairline cracks), discoloration, and
other defects.
The threaded dome ring joint should be well lubricated with
petroleum or a soap-thickened mineral oil. If corrosive products
have accumulated on joints and cannot readily be removed with
solvents, the parts should be discarded and replaced.
12
Model 371LED-120 Rotating Light
Publicité
Chapitres
Table des Matières
