Timer Operation - Sharp AY-XP9RMR Mode D'emploi

TIMER OPERATION

Before setting the timer, make sure the clock is properly set with the current time.
TIMER OFF
1
Press the TIMER OFF button.
• " " will blink on the remote control.
• " " will disappear and previous setting time
will display on the remote control .
2
Press the or
desired time.
• Every press of
the time setting by 1 minute. Holding down
or button rapidly changes the time
setting by 1 minute and then 10 minutes.
3
Press the TIMER OFF button.
• The orange TIMER lamp ( ) will light up.
• " " will be displayed on the remote control.
• " " and current time will display on the
remote control.
TO CANCEL
Press the TIMER OFF button again.
• The orange TIMER lamp ( ) will turn off.
• " " will disappear on the remote control.
NOTE:
• If the remote control buttons are not pressed
for 5 seconds while the "OFF" or "ON" is blink-
ing, the "OFF" or "ON" will disappear and any
changes made will not be saved.
• Once you set "TIMER OFF" and/or "TIMER ON",
the timer setting will become daily settings un-
less you cancel the timer.
button to set the
or button changes
2
1
3
TIMER ON
1
Press the TIMER ON button.
• " " will blink on the remote control.
• " " will disappear and previous setting time
will display on the remote control.
2
Press the
desired time.
• Every press of
the time setting by 1 minute. Holding down
or button rapidly changes the time
setting by 1 minute and then 10 minutes.
3
Press the TIMER ON button.
• The orange TIMER lamp ( ) will light up.
• " " will be displayed on the remote control.
• " " and current time will display on the
remote control.
TO CANCEL
Press the TIMER ON button again.
• The orange TIMER lamp ( ) will turn off.
• " " will disappear on the remote control.
TO COMBINE TIMER ON AND TIMER OFF
The TIMER ON and TIMER OFF can be used in
combination.
NOTE:
• You cannot program the TIMER ON and TIMER
OFF to operate the unit at different tempera-
tures or other settings.
• Either timer can be programmed to activate prior
to the other.
GB-10
or button to set the
or button changes
2
1
3