Using Your Cleaner - Hoover TELIOS EXTRA Manuel D'utilisation

With this the Candy Hoover Group Srl, declares that this appliance marked with
complies with the essential requirements of the Directives 2014/53/EU and
2011/65/EU. To receive a copy of the declaration of conformity, please contact the
manufacturer at: www.candy-group.com
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy
GETTING TO KNOW YOUR CLEANER
A. Accessory Door
B. Main Cleaner
C. Bag Door
D. Mechanical Bag Check Indicator*
E. On/Off Pedal
F. Exhaust Filter Cover
G. Cord Reel Pedal
H. Power Control**:
H1. Variable Power Control Slider**
H2. Led Display With Variable Power
Controls** And Led Bag Check Indicator*
H3. Led Display With Variable Power
Controls**, Silent Power Mode
And Led Bag Check Indicator*
I. Carry Handle
J. Bag Door Release Latch
K. Hose
L. Hi-Controller Remote Control
Handle With Soft Grip*
L1. Variable Power Control Buttons
L2. Silent Power Button
L3 On/Off Button
L4. Led Battery Indicator Of
Handle's Remote Control
La. Integrated Accessories onto the
handle: Crevice tool, Dusting
Brush and Furniture tool*
M. Advanced Comfort Handle With Soft
Grip, Suction Regulator And Integrated
Accessories: Crevice Tool, Dusting Brush
*Certain Models Only ** May vary according to model
and Furniture Tool* (See La)
N. Essential Handle With Soft
Grip, Suction Regulator and
Integrated Crevice Tool*
O. Telescopic Tube**
O1. Telescopic Tube Secure Connection*
O2. Telescopic Tube Adjuster**
P. Carpet and Floor Nozzle
Secure Connection*
Q. Floor Type Selector Pedal
R. Carpet and Floor Nozzle Slider*
S. Carpet and Floor Nozzle (Gp)**
S1. Carpet Nozzle (Ca)*
S2. Hard Floor Nozzle (Hf)*
T1. Pre-Motor Filter
T2. Pre-Motor Filter Frame
U. Exhaust Filter
V. Bag Holder
W. Bag
X. Accessory Set
X1. Crevice Tool
X2. Furniture Nozzle
X3. Dusting Brush
Y. Mini Turbo Dual Action Pet
Hair Remover Nozzle*
Z. Mini Turbo Dual Action
Allergen Remover Nozzle*
AA. Parquet Extra Care Nozzle*
AB. Parquet Care Nozzle*
AC. Long 2in1 Tool*
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release the hose: simply press the two latches on the hose end and pull. [1]
2. Connect the hose handle** to the upper tube end. [2]
3. Connect the tube lower end to the carpet and floor nozzle** or accessories if
required. [3]

USING YOUR CLEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red marker. [6]
2. Adjust the telescopic tube to the desired height by moving the telescopic tube
adjuster** and raise or lower the tube to the most comfortable cleaning position. [5]
3. After connecting the telescopic tube lower end to Carpet and Floor Nozzle** or
accessories if required, press the floor type selector* pedal on the nozzle to select
the ideal cleaning mode for the floor type.
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for deeper cleaning.
Carpet & Floor Nozzle**: [4]
- Hard floor Cleaning: Press the pedal on the nozzle on Hard Floor mode and adjust
the slider on the nozzle on ALL FLOORS. In this position brushes, wheels and wiper
blade are lowered to protect hard floors. [4a]
- Standard Carpet & Rugs Cleaning: Press the pedal on the nozzle on Carpet mode
and adjust the slider on the nozzle on ALL FLOORS. In this position brushes and
wiper blade are raised while wheels are lowered to allow a perfect ease of movement
on such surfaces. [4b]
- Deep Carpet Cleaning: Press the pedal on the nozzle on Carpet mode and adjust
the slider on the nozzle on DEEP CARPET CLEANING. In this position brushes,
wheels and wiper blade are raised for a deeper cleaning of your carpet. [4c]
WARNING: It is recommended to avoid potential scratching of wooden floors that
the pedal is not set on hard floor mode and the slider on deep carpet cleaning.
Switch the cleaner on by pressing the On/Off Pedal on the cleaner main body [7] or
4.
by pressing the On/Off button onto the hose handle*. [8]
5. Adjust the power level by pressing the variable power control buttons on the
display*, [9] or by adjusting the variable power control slider*, [10] or by pressing
the variable power control buttons on the hose handle*. [11]
Hi-Controller Handle with Settings*:
- Turn the cleaner on/off: press the on/off button. [8]
- Variable power control: press the "+, -" buttons to adjust the power. [11]
- Silent Power Mode: press the silent power button to clean thoroughly at a reduced
noise level. [12]
2
GB