Troubleshooting Guide - EINHELL GC-RT 1440 M Mode D'emploi
Masquer les pouces
Voir aussi pour GC-RT 1440 M:
- Instructions d'origine (110 pages) ,
- Mode d'emploi d'origine (18 pages) ,
- Instructions d'origine (99 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
11. Troubleshooting guide
Fault
Motor does not start
Motor performance
drops
Notice! For protection, the motor is equipped with a thermal switch which cuts out when the
motor is overloaded and switches on again automatically after a short cooling period.
Anl_GC_RT_1440_M_SPK7.indb 21
Anl_GC_RT_1440_M_SPK7.indb 21
GB
Possible causes
- No power at the plug
- Cable defective
- Switch/plug block defective
- Motor terminals or capacitor
disconnected
- excessive working depth
- Soil too hard
- Blades badly worn
- 21 -
Remedy
- Check the power cable and fuse
- Check
- By customer service workshop
- By customer service workshop
- Reduce working depth
- Correct working depth
- Replace hoe blades
29.09.2016 11:30:38
29.09.2016 11:30:38
Publicité
Table des Matières
