Transport And Storage; Technical Data - Husqvarna BLi60 Manuel D'utilisation

When all the LEDs are lit on the battery, it is fully charged.
(7)
Regularly check that the battery charger and the battery
are intact.
The battery must be charged before using it the first time.
The battery is only 30% charged when delivered.
• Put the battery in the battery charger. Make sure that
the battery is connected to the battery charger. (1), (2)
• The green charging light is lit when the battery is
connected to the battery charger. (4)
• When all LEDs are lit the battery is fully charged. (7)
• Remove the battery from the battery charger.

Transport and storage

• Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
• Store the battery and the battery charger in a dry,
moisture-free and frost-free space.
• Store the battery and the battery charger where the
temperature is between 5 ° C and 45 ° C and never in
direct sunlight.
• Be sure to store the battery separate from the battery
charger.
• Do not store the battery in places where static
electricity can occur. Never store the battery in a metal
box.
Maintenance
Make sure the battery and battery charger are clean and
that the terminals on the battery and the battery charger
are always clean and dry before the battery is placed in
the battery charger.
Keep the battery guide tracks clean. Clean plastic parts
with a clean and dry cloth.
Fault codes
Troubleshooting the battery and/or the battery charger
during charging. (5), (6)
4 – English
BATTERY HANDLING
•
•
Dispose of the battery, battery charger
and machine
Symbols on the product or its packaging indicate that this
product cannot be handled as domestic waste. It must
instead be submitted to an appropriate recycling station
for the recovery of electrical and electronic equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.

Technical data

Possible
LED display
faults
Temperature
deviation
Error LED
flashing.
Over voltage
Under voltage
Cell difference
Error LED is lit.
too much (1V).
The battery will not be charged if the battery
temperature is over 50 ° C. In that case the battery
charger will actively cool down the battery.
If the LED on the battery charger is lit solid red, the
battery charger requires a service.
Types of battery
Battery capacity
Voltage, V
Possible action
Use the battery in
surroundings where
temperatures are
between -10 ° C and
40 ° C.
Check that the mains
voltage corresponds
with that stated on
the rating plate on
the machine.
Remove the battery
from the battery
charger.
Charging the battery
Contact your service
agent.
BLi60 BLi110
Lithium-Ion Lithium-Ion
1,5 3.0
36 36