Worx SEMIAUTOMATIC DRIVER WX254L Mode D'emploi page 10

poorly maintained power tools.
f ) keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) use the power tool, accessories and
tool bits etc., in accordance with
these instructions and in the manner
intended for the particular type of power
tool, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation.
h) use clamps or another practical way to
secure and support the workpiece to a
10
stable platform.
i) Holding the work by hand or against your
body leaves it unstable and may lead to
loss of control.
5) BattEry tool uSE aNd CarE
a) recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may create
a risk of fire when used with another battery
pack.
b) use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
c) when battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) under abusive conditions, liquid may be
ejected from the battery; avoid contact.
if contact accidentally occurs, flush with
water. if liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) SErviCE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
warNiNG: Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals known to
the State of California to cause cancer, birth defects
or other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and
other masonry products and
• Arsenic and chromium from chemically-treated
lumber.