EQUATION EQH-70 Instructions Pour L'installation, L'utilisation Et L'entretien page 21

WELCOME
to EQUATION. We would like to thank you for choosing our BUILT-IN
FIREPLACE EQH for on-site installation.
All parts have been manufactured in cast iron and steel to guarantee a
long life cycle.
We are sure that your new CAST IRON FIREPLACE will prove fully
satisfactory, which is the most outstanding feature of our equipment.
Owning an EQUATION FIREPLACE displays an exceptional sense of
quality.
Please, read this manual in full. Its purpose is to familiarise users with the
FIREPLACE by explaining extremely useful installation, operational and
maintenance instructions. Keep this manual at hand for future reference
whenever necessary. If, after reading this manual, you should require any
extra clarification, please consult your regular dealer or directly call the
factory.
ATTENTION: If the device is not installed correctly, it will not provide the
excellent service for which it has been designed. Please, read these
instructions in full and trust the work to a specialist.
The surface of your Cast Iron Fireplace is protected by a coat of special
anti-heat paint that resists high temperatures. When lighting the fireplace
for the first few times, the said paint may emit some fumes. This is normal
and is due to the evaporation of certain components of the paint while it
adapts to the heat. We, therefore, recommend ventilating the room until
this phenomenon ceases to appear.
IMPORTANT NOTE
EQUATION may not be held liable for any damages caused by
alterations to its products that have not been authorised in writing, or for
faulty installation work.
Furthermore, it reserves the right to change its products without
prior warning.
EQUATION, offers a TWO YEAR warranty on its products.
The geographical coverage of the said warranty only includes the
countries in which EQUATION, a subsidiary company or an official
importer distribute its products and where Community Directive
1999/44/CE is in force.
The warranty comes into force on the purchase date of the product as
indicated on the relevant receipt and that must coincide with the
warranty document and only covers damage or breakages due to
manufacturing defects.