Commissioning; Adjusting The Height - Miele professional TT 86 Mode D'emploi

en - Commissioning
32

Adjusting the height

The height of the transfer trolley can be adjusted at the wheels. The
height must be set so that the docking mechanisms of the transfer
trolley and the machine engage.
The conveyor rollers on the transfer trolley and in the machine must
be at the same height so that the load carrier can be moved easily.
Loosen the fixing nuts  on the wheels using an SW 24 spanner.

Then unscrew the wheels from the pipes to the required height.

Tighten the fixing nuts  again.

Repeat this step on all the transfer trolley wheels.

1