OK. OKR 110 Mode D'emploi page 13

EN
Radio station search (manual): Press TUN-DN or TUN-UP to reduce/increase the
frequency by 0.1 MHz.
RDS:
When the product is tuned to a RDS station, the name of the station and RDS are
shown in the display.
The product's clock time is automatically synchronised if the station is transmitting a
time signal.
Setting the volume: Set the volume using the VOL+/– keys.
6
Saving radio station (manually): Tune in the desired station.
7
Press MEMORY (Display:
Selecting memory number (
MEMORY.
Recalling saved radio stations: Press ALARM 1 or ALARM 2.
Saving radio station (automatically):
8
Press and hold MEMORY for approx. 3 seconds. All stations within range (max. 30) will
be saved automatically.
Recalling saved radio stations: Press ALARM 1 or ALARM 2 during radio operation.
Setting the time: In standby mode, press and hold CLOCK SET for approx. 2 seconds
9
(display:
Use TUN-UP or TUN-DN to choose 12 or 24 hour time display.
Confirm with CLOCK SET. The hours are flashing.
Set the hours with TUN-UP or TUN-DN. Confirm with CLOCK SET. The minutes are
flashing.
Set the minutes with TUN-UP or TUN-DN. Confirm with CLOCK SET.
Setting the alarm: In standby mode, press and hold ALARM 1 for approx. 2 seconds
10
(display:
Use TUN-UP or TUN-DN to choose the alarm signal:
•
•
Confirm with ALARM 1. The hours are flashing.
Set the hours with TUN-UP or TUN-DN. Confirm with ALARM 1. The minutes are
flashing.
Set the minutes with TUN-UP or TUN-DN. Confirm with ALARM 1 (display: current
time and AL1). The alarm has been set and activated successfully.
If desired, follow the steps above to set a seconds alarm time. To do so, use the
ALARM 2 key.
Activating/Deactivating alarm: In standby mode, press ALARM 1/2.
11
• AL1/2 lights up = alarm function activated
• AL1/2 goes off = alarm function deactivated
Snooze: When the alarm sounds, press SNOOZE. The alarm will sounds again
12
5 minutes afterwards.
Switching off the alarm: When the alarm sounds, press ALARM 1/2.
13
Adjusting display brightness: Use DIMMER to select one of the 4 brightness levels.
14
110_A6_131206 (1.3).indb 12
).
lights up. AL1 flashes).
= FM radio
= buzzer
12
and MEMORY are flashing).
to ): Press ALARM 1 or ALARM 2. Confirm with
6/12/13 6:05