INTENDED USE
The product has been designed for a fixed installation underneath cupboards, shelves and
other furniture.
Every other type of use can lead to damage to the product or injury.
COMPONENTS
Fold out front and rear page for product illustrations.
A. Power cord and plug
B. Ventilation slots
C. Wire antenna
D. STANDBY indicator light
E. VOL+ key
F. VOL– key
G. TUN-UP key
H. TUN-DN key
I. SLEEP key
The product may be available in different colours.
INSTALLATION
Choosing the suitable location:
1
• Within sufficient reach for the power plug to a wall outlet (powr cord length:
180 cm). Wall outlet must remain easily accessible after complete installation.
• Mounting underneath a sturdy shelf (thickness: 16 to 20 mm)
2
Tape the template underneath the shelf on which the product is to be mounted. Use a
pen to mark the drill holes.
Remove the template. Drill 4 holes (6 mm drill bit).
Insert the 4 spacers into the product.
Fix the product with the 4 screws on the surface (Allen key, size 3/16).
Warning: Do not mount the product on the surface without the use of the spacers in
order not to obstruct proper ventilation.
Lay out the wire antenna.
OPERATION
Note: The letters
perform the respective operation task.
Connecting to power: Connect the power plug with a suitable wall outlet (display:
3
Switching product on: Press STANDBY. The STANDBY indicator goes off.
4
Switching product off: Press STANDBY to set the product on standby mode. The
STANDBY indicator lights up red.
Radio station search (automatic): Press and hold TUN-DN or TUN-UP for approx.
5
2 seconds. The station search stops automatically when a station's signal is received by
the product.
110_A6_131206 (1.3).indb 11
,
and
inside the illustrations are indicating the sequence on how to
). The STANDBY indicator lights up red. The product is in standby mode now.
11
J. MEMORY key
K. LCD display
L. SNOOZE/DIMMER key
M. STANDBY key
N. CLOCK SET key
O. ALARM 1 key
P. ALARM 2 key
Q. Loudspeaker
R. Battery compartment
Accessories:
• Screws (x4)
• Spacers (x4)
• Template (x1)
EN
6/12/13 6:05