Take Photo; Record Videos; Photo And Video Timer - TOOLCRAFT Pro Notice D'emploi

b) Take Photo
• Adjust the microscope so that the camera lens (A7) is close to and pointing at the object.
• Make sure the object to be examined is centered under the lens.
• While observing the image preview area (B4), bring the image into focus.
• To capture the image select the camera shortcut
• Photos will be stored in File > Photos Folder.
Captured images show as thumbnails in the saved images window (B7). If you hover the mouse over a
thumbnail, the image will show in the preview window. Images are stored in the JPG format.
c) Record Videos
• Adjust the microscope so that the camera lens (A7) is close to and pointing at the object.
• Make sure the object to be examined is centered under the lens.
• While observing the image preview area (B4), bring the image into focus.
• To start recording click on the Video shortcut
• Click the flashing icon to stop recording.
• Videos will be stored in File > Videos Folder.
Captured videos show as thumbnails in the saved images window (B7). If you hover the mouse over a
thumbnail, the image will show in the preview window. Videos are stored in the AVI format.
d) Photo and Video Timer
.
icon, or press the snapshot button.
.The icon will flash to indicate recording has started.
• You can set a custom start and stop timer for capturing photos or recording
video.
• Select the Timer shortcut
• Set your desired parameters.
• Select Start, to begin recording.
Recording will stop after the program has run through the parameters,
or if you select Stop to end the timer.
, then choose Photo or Video.
25