Introduction; Explanation Of Symbols; Intended Use - TOOLCRAFT Pro Notice D'emploi

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!
These operating instructions are part of this product. They contain important notes on commissioning and
handling. Also consider this if you pass on the product to any third party. Therefore, retain these operating
instructions for reference!
If there are any technical questions, please contact:
International:
United Kingdom:

2. Explanation of Symbols

The symbol with the exclamation mark in the triangle is used to indicate important information in these
operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.

3. Intended Use

The product outputs a magnified image to your computer via USB 2.0 connection and is suitable for examining solid
objects such as coins, stamps, rocks, insects, plants, textiles, circuit boards, etc. Dimmable built-in LED lights provide
brightness, and the bundled software allow the user to calibrate the microscope, edit and measure saved images.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes
other than those described above, the product may be damaged. In addition, improper use can result in other hazards.
Read the instructions carefully and store them in a safe place. Make this product available to third parties only together
with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
www.conrad.com/contact
www.conrad-electronic.co.uk/contact
17