SPORTSTECH HGX100 Mode D'emploi page 57

STEP 8
Attach the right butterfly adjustment (25#) through the hole of the front press base and secure them with 1pc spacer
(71#),cover (53#), 1pc M6 Aircraft nut (104#) and 1pc M6X33 Allen bolt (111#).
Attach the right butterfly (10#) to the right butterfly adjustment (25#) and secure them together 1pc M8×23 Allen bolt
(90#),2pcs plastic washer (73#) and 1 pc Ø6 washer (106#) and 1 pc M6 Aircraft nut (104#). You can select the
desired butterfly position with the lock pin (52#).
Attach the foam roll (37#) as the diagram shows and secure the handle bar (12#) with 1 pc M10*20 Allen bolt (92#)
and 1pc Ø10 washer (105#).
Use the same way to install the left ones.
142
53
104
53
104
142
90
108
108
105
52
105
92
80
59
57