Power Supply - i-tec C31HUBMETAL4 Mode D'emploi

EN
INSTALLATION IN WINDOWS, MACOS, LINUX, ANDROID, CHROMEOS
The HUB is installed automatically, no need install drivers. Connect the
connector of the power adaptor to the HUB and connect the power adaptor to
a socket outlet with 230V. Then connect the HUB via the USB-C cable to an
open USB-C port on your device and follow the instructions on the screen.
DESCRIPTION
1. 1x USB-C port PD (power delivery only) for connecting a USB-C power adapter
2. 1x input USB-C for connecting to a device
3. 4x output USB 3.0 ports for connecting USB devices with quick
charging support (BC 1.2)
4. LED diode – the diode is ON when the HUB is connected to the power
adaptor or to a USB port of a notebook / PC

POWER SUPPLY

If high energy demand devices are connected (e.g. external drives, mobile
phones, etc.) it is important to connect a USB-C charging adapter – not
included. Otherwise, the laptop's USB-C port may not be capable of
supplying sufficient energy to operate these devices.
CHARGING
The HUB supports charging of the connected USB mobile equipment such
as smartphones (including iPhone and Samsung phones), e-book readers,
multi-media players, GPS navigators, and tablets. The HUB does not support
charging of iPad and Samsung tablets which require special identification
circuits. Using the original cable connect the equipment to be charged to
the USB port of the HUB. At the same time the power adaptor needs to be
connected to the HUB as well.
6
Quick Start / USB-C Metal Charging HUB 4 Port