Table des Matières
Publicité
• Holding and guiding the tool @
- always use auxiliary handle F 3 (can be adjusted
as illustrated)
! while working, always hold the tool at the grey-
coloured grip area(s)
- keep the ventilation slots uncovered
- do not apply too much pressure on the tool; let the
tool do the work for you
APPLICATION ADVICE
• Use the appropriate bits #
! only use sharp bits
• For drilling in concrete or stone a steady pressure on
the drill is required
• When drilling ferrous metals
- pre-drill a smaller hole, when a large hole is required
- lubricate drill bit occasionally with oil
• Splinterfree drilling in wood $
• Dustfree drilling in walls %
• Dustfree drilling in ceilings ^
• Drilling in tiles without skidding &
• For more tips see www.skileurope.com
MAINTENANCE / SERVICE
• Always keep tool and cord clean (especially ventilation
slots H 3)
! disconnect the plug before cleaning
• If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skileurope.com)
ENVIRONMENT
• Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 00/6/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol * will remind you of this when the need for
disposing occurs
DECLARATION OF CONFORMITY
• We declare under our sole responsibility that this
product is in conformity with the following standards or
standardized documents: EN 60, EN 01, in
accordance with the provisions of the directives
006//EC, 00/10/EC, 006//EC
• Technical file at: SKIL Europe BV (PT-SEU/PJE),
BD Breda, NL
Arno van der Kloot
Vice President
Operations & Engineering
SKIL Europe BV, 4825 BD Breda, NL
.0.010
NOISE/VIBRATION
• Measured in accordance with EN 60 the sound
pressure level of this tool is dB(A) and the sound
power level 10 dB(A) (standard deviation: dB), and
the vibration ✱ (hand-arm method; uncertainty K =
1. m/s²)
✱ when drilling in metal . m/s²
✱ when impact drilling in concrete 1. m/s²
• The vibration emission level has been measured in
accordance with a standardised test given in EN 60;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories, may
significantly increase the exposure level
- the times when the tool is switched off or when it is
running but not actually doing the job, may
significantly reduce the exposure level
! protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
F
Perceuse à percussion
INTRODUCTION
• Cet outil est conçu pour les travaux de perçage à
percussion dans la brique ainsi que le perçage dans le
bois, le métal, la céramique et les matières plastiques
• Lisez et conservez ce manuel d'instruction 2
SPECIFICATIONS TECHNIQUES 1
ELEMENTS DE L'OUTIL 3
A Interrupteur de marche/arrêt et réglage de vitesse
B Bouton de blocage de l'interrupteur
C Molette de réglage de la vitesse maximum
D Commutateur pour inverser le sens de rotation
E Commutateur pour sélectionner la fonction de perçage
F Poignée auxiliaire
G Jauge de profondeur
H Fentes de ventilation
10
Jan Trommelen
Approval Manager
1021
Publicité
Table des Matières
