Devon & Devon Lady Instructions De Montage page 12

4)
Once you have mounted a
side support on each leg, join
the legs through the front
support (which has two equal
ends). The front support is
fastened to the legs in the same
way as the side ones.
6)
Mark the position of the
holes on the wall for fastening
the structure.
5)
Lean the structure you have
just assembled against the wall.
Use a level to check that the structure is
positioned correctly in both a parallel
and perpendicular position to the wall.
7)
Remove the structure from
the wall, drill the holes, mount
the rawl plugs and tighten the
screws.
13