BTI PROFILINE TS 59E Manuel D'utilisation page 36

E N G L I S H
PLUNGE SAW
Congratulations!
You have chosen a BTI tool. Years of experience,
thorough product development and innovation make
BTI one of the most reliable partners for professional
power tool users.
POSITION OF THE DATE CODE (fi g. 6)
The date code is stamped onto the side of the base
plate (z).
Technical data
Item number
Type
Voltage
Power
No-load speed min -1
Blade diameter
Maximum depth of cut
90˚ (without guide rail)
90˚ (with guide rail)
Blade bore
Bevel angle adjustment
Weight
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
Defi nitions: Safety Guidelines
The defi nitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may result in
property damage.
L
K
L
K
TS 59E
9033062
Vibration total values (triax vector sum) determined
2
according to EN 60745:
V 220-240
TS 59E
DC
W 1300
1750-4000
mm 165
The declared vibration emission value has been
measured in accordance with a standard test method
mm 59
and may be used for comparing one tool with another.
mm 55
The declared vibration emission value may also be
mm 20
used in a preliminary assessment of exposure.
47°
kg 5
10 Amperes, mains
13 Amperes, in plugs
An estimation of the level of exposure to vibration
experienced during a given period of work should also
take into account the times when the tool is switched off
and when it is running idle in addition to the trigger time.
This may signifi cantly reduce the exposure level over
the total working period.
EC-Declaration of conformity
MACHINERY DIRECTIVE
TS 59E
BTI declares that these tools have been designed in
compliance with:
2006/95/EC, EN 60745-1, EN 60745-2-5.
36
Denotes risk of electric shock.
Denotes risk of fi re.
(sound pressure)
pA
(sound pressure uncertainty) dB(A) 3
pA
(acoustic power)
WA
(acoustic power uncertainty) dB(A) 3
WA
Vibration emission value = 2.8 m/s
Uncertainty K = 1.5 m/s
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the
ways in which the tool is used. This could lead
to a signifi cant underestimate of exposure
when the tool is used regularly in such a way.
TS 59E
TS 59E
dB(A 92
dB(A) 103
2
2