Troubleshooting - Beem B35.001 Mode D'emploi

EN
The following table helps in localising and remedying minor faults:
fault
The control indicator does
not light up after inserting
the mains plug.
The automatic circuit
breaker in the fuse box
trips.
Oil leaks from underneath
the appliance.
NOTE
► If you cannot resolve the problem with the steps described above, please contact
customer service.
BEEM - Elements of Lifestyle
Vital-Grill & Sandwich 2 in 1

Troubleshooting

Possible cause
Automatic circuit breaker in
fuse box tripped.
Control indicator defective.
Too many appliances con-
nected to the same power
circuit.
No fault detected.
Drip tray not properly
positioned.
Drip tray is full.
Remedy
Switch on the automatic
circuit breaker again.
Contact customer service.
Reduce the number of appli-
ances on the power circuit.
Contact customer service.
Position the drip tray prop-
erly.
Empty drip tray.
21