Technical Specifications; Troubleshooting - Beem Stand- & Tischgrill BBQ Mode D'emploi

BBQ standalone & tabletop grill
Model
Type number
Operating voltage
Mains frequency
Power consumption
Dimensions
Height of the
standalone appliance
Approximate weight
as tabletop grill
as standalone grill
Protection class
Type of protection
The following table helps in localising and remedying minor faults:
fault
The control indicator (5)
does not light up after
inserting the mains plug
or during heating.
The automatic circuit
breaker in the fuse box
trips.
Liquid leaks out of the
appliance.
NOTE
► If you cannot resolve the problem with the steps described above, please contact
customer service.
22

Technical Specifications

Standalone and tabletop grill
BBQ standalone & tabletop grill

Troubleshooting

Possible cause
Indicator lamp defective.
Too many appliances con-
nected to the same power
circuit.
No fault detected.
Appliance not standing
evenly.
Drip tray is too full.
B34,001
230 V~
50 Hz
1600 W
265 x 517 x 534 mm
(H x W x D)
970 mm
4.4 kg
6.0 kg
I
IP X0
Remedy
Contact customer service.
Reduce the number of appli-
ances on the power circuit.
Contact customer service.
Make sure that the appliance
is standing evenly.
Only fill the drip tray up to
the "MAX" mark.
BEEM - Elements of Lifestyle
EN