Lubrication; Optional Accessories; Protecting The Environment - DeWalt D26453 Traduction De La Notice D'instructions Originale

MAINTENANCE
Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of
injury, turn unit off and disconnect
machine from power source before
installing and removing accessories,
before adjusting or changing
set-ups or when making repairs.
Be sure the trigger switch is in the OFF
position. An accidental start-up can
cause injury.
Replacing the Sanding Pad and the
Speed Limiter Disc (fi g. 4)
Both the sanding pad (d) and the speed limiter disc
(j) are consumable parts.
The sanding pad needs replacement when signs
of wear become evident. The speed limiter disc
needs replacement when the sanding pad speed
increases dramatically when lifting the sander off the
workpiece.
1. Unplug the tool.
2. Loosen the screws (k) and remove the pad.
3. Replace the sanding pad (d) and/or speed
limiter disc (j) and tighten the screws (k), making
sure the speed limiter disc is aligned properly.

Lubrication

Your power tool requires no additional lubrication.
Cleaning
NOTE: After the tool is used in metal sanding
applications without dustbag, clean the tool using
low-pressure air.
WARNING: Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.

Optional Accessories

WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D WALT, recommended
E
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.

Protecting the Environment

Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and
packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D WALT provides a facility for the collection and
E
recycling of D WALT products once they have
E
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D WALT office at the address indicated in this
E
manual. Alternatively, a list of authorised D
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
EN G LI SH
WALT, have
E
WALT product
E
WALT
E
25