Replacement; Water Filter - Samsung RS22T55 Guide D'utilisation

Masquer les pouces Voir aussi pour RS22T55:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Maintenance

Replacement

Water filter

WARNING
• Do not use third-party water filters. Use only Samsung-provided or -approved filters.
• Unapproved filters may leak and damage the refrigerator, causing electric shock.
Samsung is not responsible for any damage that may occur from use of third-party
water filters.
The Filter Reset indicator (
filter. Before replacing the filter, make sure the water supply line is shut off.
NOTE
• A newly installed filter may cause the water dispenser to spurt water briefly. This is
because air has entered the waterline.
• The replacement process may cause the water dispenser to drip for a short period of
time. If it drips, simply wipe up any water on the floor with a dry towel.
56
English
Untitled-10 56
) turns red to let you know it is time to replace the water
1. Shut off the water supply line.
2. Turn the knob of the filter cartridge
90 degrees counterclockwise (1/4 turn).
The filter cartridge unlocks.
3. Pull out to remove the cartridge.
- If the water filter is severely
contaminated, the cartridge may not
be easy to remove. If that is the case,
use force to remove the cartridge.
- To prevent water leaks from the filter
opening, pull the cartridge straight
out while removing it.
4. Insert a new filter cartridge. Use only
Samsung-provided or approved filters.
5. Turn the cartridge knob clockwise to
lock into place.
6. On the Home screen, tap Fridge
Manager > Fridge Settings > Water
Filter, and then select RESET. The filter
indicator turns off.
7. When you are done replacing the filter,
open the water valve and run water
through the dispenser for about 7
minutes. This is to remove impurities
and air from the water line.
2019-11-11 PM 6:56:00

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rs27t55

Table des Matières