Entrance Panel Configuration Instructions - Alcad GRF-304 Mode D'emploi

ENTRANCE PANEL CONFIGURATION INSTRUCTIONS

Assign a different identification number to each building, beginning with number 1. For example: for 3 buildings, assign the numbers
1, 2 and 3; for 4 buildings, assign the numbers 1, 2, 3 and 4; and so on.
Configure the entrance panel of the external point of entry as the main external panel. Where there are several external points of entry,
assign a different number to each of the external entrance panels of the other points of entry (secondary external panels), beginning
with the number 1.
EXTERIOR ENTRANCE
2 - W I R E D O O R
MAIN
E N T R Y S Y S T E M S
Number
SECONDARY
Number