Entrance Panel - Alcad GRF-400 Manuel D'utilisation

If necessary, screw the flush-mounted box to the
wall using M6 metal toggle screws (Not included).

ENTRANCE PANEL

Note A tool enabling you to turn the screws of the entrance panel is included.
Note Un outil qui permet de tourner les vis de la plaque d’entrée est inclus.
Insert the card that identifies the pushbutton.
Make the electrical connections. See wired
diagrams.
D I G I T A L D O O R E N T R Y S Y S T E M S
Screw the panel to the flush-mounted box as shown
in the illustration.
remove the protective backing.
Once the remaining components of the installation
have been connected, unscrew the panel, remove
the protective backing and make a call. Now
adjust the entrance panel. See page 18.
Not included
Do not